Testing Process

EPS2 cartridges are tested using two methods to ensure maximum reliability. Preliminary testing with the LT-777 Universal Cartridge Analyzer verifies proper operation of the magnetic roller, OPC drum, cartridge charging system, wiper and recovery blades. Final testing is accomplished by visual inspection of the cartridge and of the printed pages produced from the finished cartridge. Final test pages include grey scale and black level tests and character formation tests.

Each toner cartridge is packaged in either our OEM generic box, to satisfy the needs of our retail store clients, or our own Envirolaser packaging. Both types of packaging are 100% recyclable, being composed of corrugated paper and pressed paper molded materials. The antistatic, mylar film bag is the only component of our package which is not recyclable.

Open clamshell cover of printer and remove spent toner cartridge. Reset density dial to “7”. Remove dirty fuser wand from fuser unit and replace with new wand supplied with cartridge. While holding replacement toner cartridge in a horizontal orientation, gently rock cartridge side to side and front to back to ensure proper toner distribution. Insert toner into proper location on printer. Remove seal. Using cotton swab supplied, carefully clean corona wire and guard wires located in the bed of the printer. Close cover and print 5 to 10 pages to ensure proper cartridge operation.

Warranty

Our EPS2 toner cartridges are guaranteed to be free from defects in workmanship and materials for a period of one year from date of manufacture. Any defective cartridge is replaced at no additional charge, or a credit or refund is provided to the client.

Mail questions or comments to info@envirolaser.com Copyright © 2001 Envirolaser Ltd. Last modified: June 12,2001